Skip to content
Amanjeda Casa
Enquire

Amanjeda Casa

Cart

Your cart is empty

Eggersmann unique kitchen with a natural-stone island, dark cabinetry and a brass table.

German kitchens · Amanjeda Casa, Tallinn

Eggersmann kitchens

German kitchens by Eggersmann, in natural stone, wood veneer and metal.
↓

Eggersmann · materials & architecture

Natural materials for your kitchen.

In our Tallinn showroom you can compare natural stone and wood veneer with Eggersmann’s metal finishes.

Eggersmann kitchen with a veined stone island and dark wood cabinetry.

01

Natural stone.

Veins run across the face of the island. Each slab has its own markings, so the choice of stone changes the character of the whole kitchen.

Close-up of dark Eggersmann wood veneer fronts and a recessed handle.

02

Wood veneer.

The grain gives a long run of cabinet fronts a sense of direction. In this kitchen the dark veneer sets off the pale stone of the island.

Bronzed brass Eggersmann cabinetry against dark kitchen fronts.

03

Metal finishes.

Brass has a warmer tone than stainless steel. Against dark cabinetry, the edge of a metal surface catches the light.

Material photography: Eggersmann.

Eggersmann unique and glance

Eggersmann stone kitchen island with a matching stone worktop and front.

unique · Natural stone

The worktop, fronts and sides can all be cut from the same material. In stone, the joints and the way the veining meets at an edge give the island the appearance of a single block.

Stone at Eggersmann
Eggersmann kitchen island with illuminated glass-fronted cabinets set into the front beneath a dark stone worktop.
Photograph by Aaron Fairooz · Eggersmann USA

glance · Glass display cabinets

The glass-fronted cabinets sit directly beneath the island worktop, alongside the solid fronts. Slender black frames and soft interior lighting put tableware on display on the living side of the island.

The glance collection

Eggersmann

Materials

Eight material groups, from wood veneer to metal. Each finish has a reference you can send to the showroom.

Veneer

honey oakhoney oak

honey oak

REFERENCE
3566
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

brushed oak silverbrownbrushed oak silverbrown

brushed oak silverbrown

REFERENCE
3510
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

brushed core ash lightbrushed core ash light

brushed core ash light

REFERENCE
3518
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Silver oak oiledSilver oak oiled

Silver oak oiled

REFERENCE
3549
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Fineline Striped SandFineline Striped Sand

Fineline Striped Sand

REFERENCE
3559
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

pearl oakpearl oak

pearl oak

REFERENCE
3567
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

bronzed oakbronzed oak

bronzed oak

REFERENCE
3569
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

fossil oak, deep brushedfossil oak, deep brushed

fossil oak, deep brushed

REFERENCE
3570
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Smoked oak planked, brushedSmoked oak planked, brushed

Smoked oak planked, brushed

REFERENCE
3535
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

oak smoked, brushedoak smoked, brushed

oak smoked, brushed

REFERENCE
559
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

brushed core ash anthracitebrushed core ash anthracite

brushed core ash anthracite

REFERENCE
3519
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

light oak brushedlight oak brushed

light oak brushed

REFERENCE
3547
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

oak basalt black, brushedoak basalt black, brushed

oak basalt black, brushed

REFERENCE
3555
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

oak grey brown bicolor, brushedoak grey brown bicolor, brushed

oak grey brown bicolor, brushed

REFERENCE
3561
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

bog oakbog oak

bog oak

REFERENCE
3568
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Black WalnutBlack Walnut

Black Walnut

REFERENCE
3563
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

walnutwalnut

walnut

REFERENCE
3527
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Fineline grafite blackFineline grafite black

Fineline grafite black

REFERENCE
3530
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Fineline Maro ebonyFineline Maro ebony

Fineline Maro ebony

REFERENCE
3534
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

oak dark brown riftcutoak dark brown riftcut

oak dark brown riftcut

REFERENCE
3545
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

walnut satinwalnut satin

walnut satin

REFERENCE
3506
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

core walnutcore walnut

core walnut

REFERENCE
3660
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

teakteak

teak

REFERENCE
3571
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

gravel walnutgravel walnut

gravel walnut

REFERENCE
3572
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

honey oakhoney oak

honey oak

REFERENCE
5566
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

brushed oak silverbrownbrushed oak silverbrown

brushed oak silverbrown

REFERENCE
5510
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

brushed core ash lightbrushed core ash light

brushed core ash light

REFERENCE
5518
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Silver oak oiledSilver oak oiled

Silver oak oiled

REFERENCE
5549
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Fineline Striped SandFineline Striped Sand

Fineline Striped Sand

REFERENCE
5559
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

pearl oakpearl oak

pearl oak

REFERENCE
5567
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

bronzed oakbronzed oak

bronzed oak

REFERENCE
5569
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

fossil oak, deep brushedfossil oak, deep brushed

fossil oak, deep brushed

REFERENCE
5570
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Smoked oak planked, brushedSmoked oak planked, brushed

Smoked oak planked, brushed

REFERENCE
5535
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

oak smoked, brushedtoak smoked, brushedt

oak smoked, brushedt

REFERENCE
569
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

brushed core ash anthracitebrushed core ash anthracite

brushed core ash anthracite

REFERENCE
5519
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

light oak brushedlight oak brushed

light oak brushed

REFERENCE
5547
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

oak basalt black, brushedoak basalt black, brushed

oak basalt black, brushed

REFERENCE
5555
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

oak grey brown bicolor, brushedoak grey brown bicolor, brushed

oak grey brown bicolor, brushed

REFERENCE
5561
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

bog oakbog oak

bog oak

REFERENCE
5568
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Black WalnutBlack Walnut

Black Walnut

REFERENCE
5563
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

WalnutWalnut

Walnut

REFERENCE
5527
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Fineline grafite blackFineline grafite black

Fineline grafite black

REFERENCE
5530
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Fineline Maro ebonyFineline Maro ebony

Fineline Maro ebony

REFERENCE
5534
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Oak dark brown riftcutOak dark brown riftcut

Oak dark brown riftcut

REFERENCE
5545
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Walnut satinWalnut satin

Walnut satin

REFERENCE
5506
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Core WalnutCore Walnut

Core Walnut

REFERENCE
5660
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

teakteak

teak

REFERENCE
5571
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

gravel walnutgravel walnut

gravel walnut

REFERENCE
5572
FRONT SURFACE
Wood veneered
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Continuous horizontal grainmatched veneer processing for fronts. Finished carcase sides, open shelf units and fillers are delivered with vertical grain. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Fineline Maro ebony embossedFineline Maro ebony embossed

Fineline Maro ebony embossed

REFERENCE
3532
FRONT SURFACE
Wood veneered, embossed
THICKNESS
18 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered non‐embossed

Edges: 1 mm edges on all sides matching

Material notes: Horizontal veneered fronts are not grain matched. DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Fineline Maro ebony, embossed, horizontal veneeredFineline Maro ebony, embossed, horizontal veneered

Fineline Maro ebony, embossed, horizontal veneered

REFERENCE
5532
FRONT SURFACE
Wood veneered, embossed
THICKNESS
18 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered non‐embossed

Edges: 1 mm edges on all sides matching

Material notes: Horizontal veneered fronts are not grain matched. DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

fineline oak grey, embossedfineline oak grey, embossed

fineline oak grey, embossed

REFERENCE
669
FRONT SURFACE
Wood veneered, embossed
THICKNESS
18 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered non‐embossed

Edges: 1 mm edges on all sides matching

Material notes: Horizontal veneered fronts are not grain matched. DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Sisal black embossedSisal black embossed

Sisal black embossed

REFERENCE
3533
FRONT SURFACE
Wood veneered, embossed
THICKNESS
18 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered non‐embossed

Edges: 1 mm edges on all sides matching

Material notes: Horizontal veneered fronts are not grain matched. DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Core Walnut embossedCore Walnut embossed

Core Walnut embossed

REFERENCE
3560
FRONT SURFACE
Wood veneered, embossed
THICKNESS
18 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered non‐embossed

Edges: 1 mm edges on all sides matching

Material notes: Horizontal veneered fronts are not grain matched. DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

fineline oak, grey embossed, horizontal veneeredfineline oak, grey embossed, horizontal veneered

fineline oak, grey embossed, horizontal veneered

REFERENCE
679
FRONT SURFACE
Wood veneered, embossed
THICKNESS
18 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered non‐embossed

Edges: 1 mm edges on all sides matching

Material notes: Horizontal veneered fronts are not grain matched. DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Sisal black embossed, horizontal veneeredSisal black embossed, horizontal veneered

Sisal black embossed, horizontal veneered

REFERENCE
5533
FRONT SURFACE
Wood veneered, embossed
THICKNESS
18 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered non‐embossed

Edges: 1 mm edges on all sides matching

Material notes: Horizontal veneered fronts are not grain matched. DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Core Walnut embossed, horizontal veneeredCore Walnut embossed, horizontal veneered

Core Walnut embossed, horizontal veneered

REFERENCE
5560
FRONT SURFACE
Wood veneered, embossed
THICKNESS
18 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered non‐embossed

Edges: 1 mm edges on all sides matching

Material notes: Horizontal veneered fronts are not grain matched. DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Macassar Amaro, horizontalMacassar Amaro, horizontal

Macassar Amaro, horizontal

REFERENCE
5511
FRONT SURFACE
Noble wood veneered fronts feature veneers from precious and unusual trees
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: veneer grain may not be matched and due to the precious nature of some veneers may be of lesser grade veneer

Edges: 1 mm edges on all sides

Material notes: Horizontal grain direction. Veneers are hand picked and grain matched or book matched to approved samples. Sample approval required before production. Sample: 40 × 40 cm on 6 mm panel, edges and back unfinished. Finished carcase sides, open shelf units and L-profile grip DGL are available but veneer processing is not continuous. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Copper oak, brushed, horizontalCopper oak, brushed, horizontal

Copper oak, brushed, horizontal

REFERENCE
5516
FRONT SURFACE
Noble wood veneered fronts feature veneers from precious and unusual trees
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: veneer grain may not be matched and due to the precious nature of some veneers may be of lesser grade veneer

Edges: 1 mm edges on all sides

Material notes: Horizontal grain direction. Veneers are hand picked and grain matched or book matched to approved samples. Sample approval required before production. Sample: 40 × 40 cm on 6 mm panel, edges and back unfinished. Finished carcase sides, open shelf units and L-profile grip DGL are available but veneer processing is not continuous. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Oak smoked with variations, brushed, horizontalOak smoked with variations, brushed, horizontal

Oak smoked with variations, brushed, horizontal

REFERENCE
5517
FRONT SURFACE
Noble wood veneered fronts feature veneers from precious and unusual trees
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: veneer grain may not be matched and due to the precious nature of some veneers may be of lesser grade veneer

Edges: 1 mm edges on all sides

Material notes: Horizontal grain direction. Veneers are hand picked and grain matched or book matched to approved samples. Sample approval required before production. Sample: 40 × 40 cm on 6 mm panel, edges and back unfinished. Finished carcase sides, open shelf units and L-profile grip DGL are available but veneer processing is not continuous. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Smoked Eucalyptus, horizontalSmoked Eucalyptus, horizontal

Smoked Eucalyptus, horizontal

REFERENCE
5556
FRONT SURFACE
Noble wood veneered fronts feature veneers from precious and unusual trees
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: veneer grain may not be matched and due to the precious nature of some veneers may be of lesser grade veneer

Edges: 1 mm edges on all sides

Material notes: Horizontal grain direction. Veneers are hand picked and grain matched or book matched to approved samples. Sample approval required before production. Sample: 40 × 40 cm on 6 mm panel, edges and back unfinished. Finished carcase sides, open shelf units and L-profile grip DGL are available but veneer processing is not continuous. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Eucalyptus silver, horizontalEucalyptus silver, horizontal

Eucalyptus silver, horizontal

REFERENCE
5565
FRONT SURFACE
Noble wood veneered fronts feature veneers from precious and unusual trees
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: veneer grain may not be matched and due to the precious nature of some veneers may be of lesser grade veneer

Edges: 1 mm edges on all sides

Material notes: Horizontal grain direction. Veneers are hand picked and grain matched or book matched to approved samples. Sample approval required before production. Sample: 40 × 40 cm on 6 mm panel, edges and back unfinished. Finished carcase sides, open shelf units and L-profile grip DGL are available but veneer processing is not continuous. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Macassar AmaroMacassar Amaro

Macassar Amaro

REFERENCE
3511
FRONT SURFACE
Noble wood veneered fronts feature veneers from precious and unusual trees
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: veneer grain may not be matched and due to the precious nature of some veneers may be of lesser grade veneer

Edges: 1 mm edges on all sides

Material notes: Vertical grain direction. Veneers are hand picked and grain matched or book matched to approved samples. Sample approval required before production. Sample: 40 × 40 cm on 6 mm panel, edges and back unfinished. Finished carcase sides, open shelf units and L-profile grip DGL are available but veneer processing is not continuous. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Copper oak, brushedCopper oak, brushed

Copper oak, brushed

REFERENCE
3516
FRONT SURFACE
Noble wood veneered fronts feature veneers from precious and unusual trees
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: veneer grain may not be matched and due to the precious nature of some veneers may be of lesser grade veneer

Edges: 1 mm edges on all sides

Material notes: Vertical grain direction. Veneers are hand picked and grain matched or book matched to approved samples. Sample approval required before production. Sample: 40 × 40 cm on 6 mm panel, edges and back unfinished. Finished carcase sides, open shelf units and L-profile grip DGL are available but veneer processing is not continuous. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Oak smoked with variations, brushedOak smoked with variations, brushed

Oak smoked with variations, brushed

REFERENCE
3517
FRONT SURFACE
Noble wood veneered fronts feature veneers from precious and unusual trees
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: veneer grain may not be matched and due to the precious nature of some veneers may be of lesser grade veneer

Edges: 1 mm edges on all sides

Material notes: Vertical grain direction. Veneers are hand picked and grain matched or book matched to approved samples. Sample approval required before production. Sample: 40 × 40 cm on 6 mm panel, edges and back unfinished. Finished carcase sides, open shelf units and L-profile grip DGL are available but veneer processing is not continuous. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Smoked EucalyptusSmoked Eucalyptus

Smoked Eucalyptus

REFERENCE
3556
FRONT SURFACE
Noble wood veneered fronts feature veneers from precious and unusual trees
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: veneer grain may not be matched and due to the precious nature of some veneers may be of lesser grade veneer

Edges: 1 mm edges on all sides

Material notes: Vertical grain direction. Veneers are hand picked and grain matched or book matched to approved samples. Sample approval required before production. Sample: 40 × 40 cm on 6 mm panel, edges and back unfinished. Finished carcase sides, open shelf units and L-profile grip DGL are available but veneer processing is not continuous. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Eucalyptus silverEucalyptus silver

Eucalyptus silver

REFERENCE
3565
FRONT SURFACE
Noble wood veneered fronts feature veneers from precious and unusual trees
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: veneer grain may not be matched and due to the precious nature of some veneers may be of lesser grade veneer

Edges: 1 mm edges on all sides

Material notes: Vertical grain direction. Veneers are hand picked and grain matched or book matched to approved samples. Sample approval required before production. Sample: 40 × 40 cm on 6 mm panel, edges and back unfinished. Finished carcase sides, open shelf units and L-profile grip DGL are available but veneer processing is not continuous. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Macassar Amaro, horizontal, high‐gloss lacquered on all sidesMacassar Amaro, horizontal, high‐gloss lacquered on all sides

Macassar Amaro, horizontal, high‐gloss lacquered on all sides

REFERENCE
5711
FRONT SURFACE
Noble wood veneered fronts feature veneers from precious and unusual trees.
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: veneer grain may not be matched and due to the precious nature of some veneers may be of lesser grade veneer

Edges: 1 mm edges on all sides

Material notes: Horizontal grain direction. Veneers are hand picked and grain matched or book matched to approved samples. Sample approval required before production. Sample: 40 × 40 cm on 6 mm panel, edges and back unfinished. Finished carcase sides, open shelf units and L-profile grip DGL are available but veneer processing is not continuous. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Copper oak, horizontal, high‐gloss lacquered on all sidesCopper oak, horizontal, high‐gloss lacquered on all sides

Copper oak, horizontal, high‐gloss lacquered on all sides

REFERENCE
5716
FRONT SURFACE
Noble wood veneered fronts feature veneers from precious and unusual trees.
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: veneer grain may not be matched and due to the precious nature of some veneers may be of lesser grade veneer

Edges: 1 mm edges on all sides

Material notes: Horizontal grain direction. Veneers are hand picked and grain matched or book matched to approved samples. Sample approval required before production. Sample: 40 × 40 cm on 6 mm panel, edges and back unfinished. Finished carcase sides, open shelf units and L-profile grip DGL are available but veneer processing is not continuous. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Smoked Eucalyptus horizontal, high‐gloss lacquered on all sidesSmoked Eucalyptus horizontal, high‐gloss lacquered on all sides

Smoked Eucalyptus horizontal, high‐gloss lacquered on all sides

REFERENCE
5756
FRONT SURFACE
Noble wood veneered fronts feature veneers from precious and unusual trees.
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: veneer grain may not be matched and due to the precious nature of some veneers may be of lesser grade veneer

Edges: 1 mm edges on all sides

Material notes: Horizontal grain direction. Veneers are hand picked and grain matched or book matched to approved samples. Sample approval required before production. Sample: 40 × 40 cm on 6 mm panel, edges and back unfinished. Finished carcase sides, open shelf units and L-profile grip DGL are available but veneer processing is not continuous. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Eucalyptus silver, horizontal, high‐gloss lacquered on all sidesEucalyptus silver, horizontal, high‐gloss lacquered on all sides

Eucalyptus silver, horizontal, high‐gloss lacquered on all sides

REFERENCE
5765
FRONT SURFACE
Noble wood veneered fronts feature veneers from precious and unusual trees.
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: veneer grain may not be matched and due to the precious nature of some veneers may be of lesser grade veneer

Edges: 1 mm edges on all sides

Material notes: Horizontal grain direction. Veneers are hand picked and grain matched or book matched to approved samples. Sample approval required before production. Sample: 40 × 40 cm on 6 mm panel, edges and back unfinished. Finished carcase sides, open shelf units and L-profile grip DGL are available but veneer processing is not continuous. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Macassar Amaro, high‐gloss lacquered on all sidesMacassar Amaro, high‐gloss lacquered on all sides

Macassar Amaro, high‐gloss lacquered on all sides

REFERENCE
3711
FRONT SURFACE
Noble wood veneered fronts feature veneers from precious and unusual trees.
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: veneer grain may not be matched and due to the precious nature of some veneers may be of lesser grade veneer

Edges: 1 mm edges on all sides

Material notes: Vertical grain direction. Veneers are hand picked and grain matched or book matched to approved samples. Sample approval required before production. Sample: 40 × 40 cm on 6 mm panel, edges and back unfinished. Finished carcase sides, open shelf units and L-profile grip DGL are available but veneer processing is not continuous. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Copper oak high‐gloss lacquered on all sidesCopper oak high‐gloss lacquered on all sides

Copper oak high‐gloss lacquered on all sides

REFERENCE
3716
FRONT SURFACE
Noble wood veneered fronts feature veneers from precious and unusual trees.
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: veneer grain may not be matched and due to the precious nature of some veneers may be of lesser grade veneer

Edges: 1 mm edges on all sides

Material notes: Vertical grain direction. Veneers are hand picked and grain matched or book matched to approved samples. Sample approval required before production. Sample: 40 × 40 cm on 6 mm panel, edges and back unfinished. Finished carcase sides, open shelf units and L-profile grip DGL are available but veneer processing is not continuous. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Smoked Eucalyptus high‐gloss lacquered on all sidesSmoked Eucalyptus high‐gloss lacquered on all sides

Smoked Eucalyptus high‐gloss lacquered on all sides

REFERENCE
3756
FRONT SURFACE
Noble wood veneered fronts feature veneers from precious and unusual trees.
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: veneer grain may not be matched and due to the precious nature of some veneers may be of lesser grade veneer

Edges: 1 mm edges on all sides

Material notes: Vertical grain direction. Veneers are hand picked and grain matched or book matched to approved samples. Sample approval required before production. Sample: 40 × 40 cm on 6 mm panel, edges and back unfinished. Finished carcase sides, open shelf units and L-profile grip DGL are available but veneer processing is not continuous. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Eucalyptus silver, high‐gloss lacquered on all sidesEucalyptus silver, high‐gloss lacquered on all sides

Eucalyptus silver, high‐gloss lacquered on all sides

REFERENCE
3765
FRONT SURFACE
Noble wood veneered fronts feature veneers from precious and unusual trees.
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: veneer grain may not be matched and due to the precious nature of some veneers may be of lesser grade veneer

Edges: 1 mm edges on all sides

Material notes: Vertical grain direction. Veneers are hand picked and grain matched or book matched to approved samples. Sample approval required before production. Sample: 40 × 40 cm on 6 mm panel, edges and back unfinished. Finished carcase sides, open shelf units and L-profile grip DGL are available but veneer processing is not continuous. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Black WalnutBlack Walnut

Black Walnut

REFERENCE
3563
FRONT SURFACE
Wood veneered fronts with vertical plank style
THICKNESS
20 mm
Front details

Base: MDF black

Reverse: veneered, with plank style

Edges: 1 mm edges on all sides

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Shelves, finished carcase side panels and back panels have vertical veneer without plank style. Patterned side panels: Z33. Groove grid: 10 cm. Handle drillings unavailable. Handles 88.510–88.516 and 88.530–88.535 are available. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

brushed core ash anthracitebrushed core ash anthracite

brushed core ash anthracite

REFERENCE
3519
FRONT SURFACE
Wood veneered fronts with vertical plank style
THICKNESS
20 mm
Front details

Base: MDF black

Reverse: veneered, with plank style

Edges: 1 mm edges on all sides

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Shelves, finished carcase side panels and back panels have vertical veneer without plank style. Patterned side panels: Z33. Groove grid: 10 cm. Handle drillings unavailable. Handles 88.510–88.516 and 88.530–88.535 are available. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Silver oak oiledSilver oak oiled

Silver oak oiled

REFERENCE
3549
FRONT SURFACE
Wood veneered front with vertical groove shape
THICKNESS
22 mm
Front details

Base: triple-ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Vertical veneer grain is not grain matched. Shelves, finished carcase side panels and back panels have vertical veneer without the groove shape. Patterned side panels: Z33. Handles and handle drillings unavailable. Maximum front dimensions (H × W): 234.5 × 95 cm / 80.6 × 125 cm. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Oak basalt black brushedOak basalt black brushed

Oak basalt black brushed

REFERENCE
3555
FRONT SURFACE
Wood veneered front with vertical groove shape
THICKNESS
22 mm
Front details

Base: triple-ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Vertical veneer grain is not grain matched. Shelves, finished carcase side panels and back panels have vertical veneer without the groove shape. Patterned side panels: Z33. Handles and handle drillings unavailable. Maximum front dimensions (H × W): 234.5 × 95 cm / 80.6 × 125 cm. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Oak grey brown bicolor, brushedOak grey brown bicolor, brushed

Oak grey brown bicolor, brushed

REFERENCE
3561
FRONT SURFACE
Wood veneered front with vertical groove shape
THICKNESS
22 mm
Front details

Base: triple-ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Vertical veneer grain is not grain matched. Shelves, finished carcase side panels and back panels have vertical veneer without the groove shape. Patterned side panels: Z33. Handles and handle drillings unavailable. Maximum front dimensions (H × W): 234.5 × 95 cm / 80.6 × 125 cm. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

honey oakhoney oak

honey oak

REFERENCE
3566
FRONT SURFACE
Wood veneered front with vertical groove shape
THICKNESS
22 mm
Front details

Base: triple-ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Vertical veneer grain is not grain matched. Shelves, finished carcase side panels and back panels have vertical veneer without the groove shape. Patterned side panels: Z33. Handles and handle drillings unavailable. Maximum front dimensions (H × W): 234.5 × 95 cm / 80.6 × 125 cm. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

pearl oakpearl oak

pearl oak

REFERENCE
3567
FRONT SURFACE
Wood veneered front with vertical groove shape
THICKNESS
22 mm
Front details

Base: triple-ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Vertical veneer grain is not grain matched. Shelves, finished carcase side panels and back panels have vertical veneer without the groove shape. Patterned side panels: Z33. Handles and handle drillings unavailable. Maximum front dimensions (H × W): 234.5 × 95 cm / 80.6 × 125 cm. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

pearl oakpearl oak

pearl oak

REFERENCE
3567
FRONT SURFACE
Real wood veneered front with vertical wooden stripes
THICKNESS
19 / 21 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Source states two thicknesses: 19 / 21 mm. Shelves, finished carcase side panels and back panels have vertical veneer without groove shape. Patterned side panels: Z33. Handle drillings unavailable. Handles 88.510–88.516 and 88.530–88.535 are available. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Silver oak oiledSilver oak oiled

Silver oak oiled

REFERENCE
3549
FRONT SURFACE
Real wood veneered front with vertical wooden stripes
THICKNESS
19 / 21 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Source states two thicknesses: 19 / 21 mm. Shelves, finished carcase side panels and back panels have vertical veneer without groove shape. Patterned side panels: Z33. Handle drillings unavailable. Handles 88.510–88.516 and 88.530–88.535 are available. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Oak basalt black brushedOak basalt black brushed

Oak basalt black brushed

REFERENCE
3555
FRONT SURFACE
Real wood veneered front with vertical wooden stripes
THICKNESS
19 / 21 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Source states two thicknesses: 19 / 21 mm. Shelves, finished carcase side panels and back panels have vertical veneer without groove shape. Patterned side panels: Z33. Handle drillings unavailable. Handles 88.510–88.516 and 88.530–88.535 are available. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Oak grey brown bicolor, brushedOak grey brown bicolor, brushed

Oak grey brown bicolor, brushed

REFERENCE
3561
FRONT SURFACE
Real wood veneered front with vertical wooden stripes
THICKNESS
19 / 21 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Source states two thicknesses: 19 / 21 mm. Shelves, finished carcase side panels and back panels have vertical veneer without groove shape. Patterned side panels: Z33. Handle drillings unavailable. Handles 88.510–88.516 and 88.530–88.535 are available. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

honey oakhoney oak

honey oak

REFERENCE
3566
FRONT SURFACE
Real wood veneered front with vertical wooden stripes
THICKNESS
19 / 21 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Source states two thicknesses: 19 / 21 mm. Shelves, finished carcase side panels and back panels have vertical veneer without groove shape. Patterned side panels: Z33. Handle drillings unavailable. Handles 88.510–88.516 and 88.530–88.535 are available. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

bog oakbog oak

bog oak

REFERENCE
3568
FRONT SURFACE
Real wood veneered front with vertical wooden stripes
THICKNESS
19 / 21 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Source states two thicknesses: 19 / 21 mm. Shelves, finished carcase side panels and back panels have vertical veneer without groove shape. Patterned side panels: Z33. Handle drillings unavailable. Handles 88.510–88.516 and 88.530–88.535 are available. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Core WalnutCore Walnut

Core Walnut

REFERENCE
3660
FRONT SURFACE
Real wood veneered front with vertical wooden stripes
THICKNESS
19 / 21 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: 1 mm edges on all sides matching

Material notes: Source states two thicknesses: 19 / 21 mm. Shelves, finished carcase side panels and back panels have vertical veneer without groove shape. Patterned side panels: Z33. Handle drillings unavailable. Handles 88.510–88.516 and 88.530–88.535 are available. Oiled surfaces: remove standing liquids immediately, use trivets for horizontal applications and maintain according to care instructions. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Smoked oak plankedSmoked oak planked

Smoked oak planked

REFERENCE
3535
FRONT SURFACE
Aluminum frame door with veneered center panel
THICKNESS
24 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additional centre-panel veneers on request. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

core ash light anthracitecore ash light anthracite

core ash light anthracite

REFERENCE
3519
FRONT SURFACE
Aluminum frame door with veneered center panel
THICKNESS
24 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additional centre-panel veneers on request. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

walnutwalnut

walnut

REFERENCE
3527
FRONT SURFACE
Aluminum frame door with veneered center panel
THICKNESS
24 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additional centre-panel veneers on request. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Fineline grafite blackFineline grafite black

Fineline grafite black

REFERENCE
3530
FRONT SURFACE
Aluminum frame door with veneered center panel
THICKNESS
24 mm
Front details

Base: triple‐ply chipboard

Reverse: matching veneered

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additional centre-panel veneers on request. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Walnut satinWalnut satin

Walnut satin

REFERENCE
3506
FRONT SURFACE
Framed door (frame with 0.65 cm), veneered
THICKNESS
22 mm
Front details

Base: triple‐ply furniture board, frame solid wood

Reverse: matching veneered

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Patterned side panels: Z33. Maximum front dimensions (H × W): 240 × 95 cm / 95 × 240 cm. Source states frame width 0.65 cm. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

WalnutWalnut

Walnut

REFERENCE
3527
FRONT SURFACE
Framed door (frame with 0.65 cm), veneered
THICKNESS
22 mm
Front details

Base: triple‐ply furniture board, frame solid wood

Reverse: matching veneered

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Patterned side panels: Z33. Maximum front dimensions (H × W): 240 × 95 cm / 95 × 240 cm. Source states frame width 0.65 cm. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Platinum oakPlatinum oak

Platinum oak

REFERENCE
3552
FRONT SURFACE
Framed door (frame with 0.65 cm), veneered
THICKNESS
22 mm
Front details

Base: triple‐ply furniture board, frame solid wood

Reverse: matching veneered

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Patterned side panels: Z33. Maximum front dimensions (H × W): 240 × 95 cm / 95 × 240 cm. Source states frame width 0.65 cm. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Oak basalt black brushedOak basalt black brushed

Oak basalt black brushed

REFERENCE
3555
FRONT SURFACE
Framed door (frame with 0.65 cm), veneered
THICKNESS
22 mm
Front details

Base: triple‐ply furniture board, frame solid wood

Reverse: matching veneered

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Patterned side panels: Z33. Maximum front dimensions (H × W): 240 × 95 cm / 95 × 240 cm. Source states frame width 0.65 cm. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

pearl oakpearl oak

pearl oak

REFERENCE
3567
FRONT SURFACE
Framed door (frame with 0.65 cm), veneered
THICKNESS
22 mm
Front details

Base: triple‐ply furniture board, frame solid wood

Reverse: matching veneered

Material notes: DGL grip channels, plinth panels and ceiling fillers have horizontal grain as standard. Patterned side panels: Z33. Maximum front dimensions (H × W): 240 × 95 cm / 95 × 240 cm. Source states frame width 0.65 cm. Natural wood colour and grain vary. Sunlight can change colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Melamine

onyx (standard carcase color)onyx (standard carcase color)

onyx (standard carcase color)

REFERENCE
2313
FRONT SURFACE
Melamine decor
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1.3 mm soft edges

Material notes: Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

opal whiteopal white

opal white

REFERENCE
2301
FRONT SURFACE
Melamine decor
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1.3 mm soft edges

Material notes: Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

fossil (standard carcase color)fossil (standard carcase color)

fossil (standard carcase color)

REFERENCE
2314
FRONT SURFACE
Melamine decor
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1.3 mm soft edges

Material notes: Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

ecruecru

ecru

REFERENCE
2316
FRONT SURFACE
Melamine decor
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1.3 mm soft edges

Material notes: Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

terraterra

terra

REFERENCE
2305
FRONT SURFACE
Melamine decor Fine Matt
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1.3 mm soft edges

Material notes: Colour-matching handles: V46. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

pearl whitepearl white

pearl white

REFERENCE
2306
FRONT SURFACE
Melamine decor Fine Matt
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1.3 mm soft edges

Material notes: Colour-matching handles: V46. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

kashmirkashmir

kashmir

REFERENCE
2307
FRONT SURFACE
Melamine decor Fine Matt
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1.3 mm soft edges

Material notes: Colour-matching handles: V46. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

platinum greyplatinum grey

platinum grey

REFERENCE
2310
FRONT SURFACE
Melamine decor Fine Matt
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1.3 mm soft edges

Material notes: Colour-matching handles: V46. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

umbraumbra

umbra

REFERENCE
2311
FRONT SURFACE
Melamine decor Fine Matt
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1.3 mm soft edges

Material notes: Colour-matching handles: V46. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

sand greysand grey

sand grey

REFERENCE
2312
FRONT SURFACE
Melamine decor Fine Matt
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1.3 mm soft edges

Material notes: Colour-matching handles: V46. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Midnight oak* (standard carcase color)Midnight oak* (standard carcase color)

Midnight oak* (standard carcase color)

REFERENCE
2818
FRONT SURFACE
Melamine decor
THICKNESS
18.6 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1.3 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Midnight oak starred finishes have an article-specific thickness of 18.6 mm. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Midnight oak, horizontal*Midnight oak, horizontal*

Midnight oak, horizontal*

REFERENCE
2918
FRONT SURFACE
Melamine decor
THICKNESS
18.6 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1.3 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Midnight oak starred finishes have an article-specific thickness of 18.6 mm. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

light oaklight oak

light oak

REFERENCE
2806
FRONT SURFACE
Melamine decor
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1.3 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Midnight oak starred finishes have an article-specific thickness of 18.6 mm. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

ChestnutChestnut

Chestnut

REFERENCE
2811
FRONT SURFACE
Melamine decor
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1.3 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Midnight oak starred finishes have an article-specific thickness of 18.6 mm. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

light oak, horizontallight oak, horizontal

light oak, horizontal

REFERENCE
2906
FRONT SURFACE
Melamine decor
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1.3 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Midnight oak starred finishes have an article-specific thickness of 18.6 mm. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Chestnut, horizontalChestnut, horizontal

Chestnut, horizontal

REFERENCE
2911
FRONT SURFACE
Melamine decor
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1.3 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Midnight oak starred finishes have an article-specific thickness of 18.6 mm. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Missouri anthracite oakMissouri anthracite oak

Missouri anthracite oak

REFERENCE
2815
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Missouri anthracite oak, horizontalMissouri anthracite oak, horizontal

Missouri anthracite oak, horizontal

REFERENCE
2915
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Ash whiteAsh white

Ash white

REFERENCE
2807
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Pembroke oak, horizontalPembroke oak, horizontal

Pembroke oak, horizontal

REFERENCE
2904
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Missouri sand oakMissouri sand oak

Missouri sand oak

REFERENCE
2813
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Missouri grey oakMissouri grey oak

Missouri grey oak

REFERENCE
2814
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Ash white, horizontalAsh white, horizontal

Ash white, horizontal

REFERENCE
2907
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Pembroke oakPembroke oak

Pembroke oak

REFERENCE
2804
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Missouri sand oak, horizontalMissouri sand oak, horizontal

Missouri sand oak, horizontal

REFERENCE
2913
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Missouri grey oak, horizontalMissouri grey oak, horizontal

Missouri grey oak, horizontal

REFERENCE
2914
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Missouri brown oakMissouri brown oak

Missouri brown oak

REFERENCE
2816
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Missouri black oakMissouri black oak

Missouri black oak

REFERENCE
2817
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

black walnutblack walnut

black walnut

REFERENCE
2819
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

nocenoce

noce

REFERENCE
2820
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Missouri brown oak, horizontalMissouri brown oak, horizontal

Missouri brown oak, horizontal

REFERENCE
2916
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Missouri black oak, horizontalMissouri black oak, horizontal

Missouri black oak, horizontal

REFERENCE
2917
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

black walnut, horizontalblack walnut, horizontal

black walnut, horizontal

REFERENCE
2919
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

noce, horizontalnoce, horizontal

noce, horizontal

REFERENCE
2920
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

grey oakgrey oak

grey oak

REFERENCE
2821
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

chestnut pebblechestnut pebble

chestnut pebble

REFERENCE
2822
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

grey oak, horizontalgrey oak, horizontal

grey oak, horizontal

REFERENCE
2921
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

chestnut pebble, horizontalchestnut pebble, horizontal

chestnut pebble, horizontal

REFERENCE
2922
FRONT SURFACE
Melamine decor, with embossed surface
THICKNESS
19 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. Optional vertical decor grain matching up to maximum material height: 30% surcharge on the matched parts only, code MPMGRM. Horizontal grain matching unavailable. Ceiling fillers, plinth panels and DGL profiles cannot be grain matched and have horizontal grain. Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Reflex bronzeReflex bronze

Reflex bronze

REFERENCE
2830
FRONT SURFACE
Melamin decor
THICKNESS
18.5 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. The page references optional decor grain matching without stating the surcharge here. DGL grip channels, plinth panels and ceiling fillers have horizontal grain. Source repeats code 2932 for Reflex blue horizontal and Reflex dark bronze horizontal. Both are retained for review.

Reflex bronze, horizontalReflex bronze, horizontal

Reflex bronze, horizontal

REFERENCE
2930
FRONT SURFACE
Melamin decor
THICKNESS
18.5 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. The page references optional decor grain matching without stating the surcharge here. DGL grip channels, plinth panels and ceiling fillers have horizontal grain. Source repeats code 2932 for Reflex blue horizontal and Reflex dark bronze horizontal. Both are retained for review.

Reflex graphiteReflex graphite

Reflex graphite

REFERENCE
2831
FRONT SURFACE
Melamin decor
THICKNESS
18.5 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. The page references optional decor grain matching without stating the surcharge here. DGL grip channels, plinth panels and ceiling fillers have horizontal grain. Source repeats code 2932 for Reflex blue horizontal and Reflex dark bronze horizontal. Both are retained for review.

Reflex blueReflex blue

Reflex blue

REFERENCE
2832
FRONT SURFACE
Melamin decor
THICKNESS
18.5 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. The page references optional decor grain matching without stating the surcharge here. DGL grip channels, plinth panels and ceiling fillers have horizontal grain. Source repeats code 2932 for Reflex blue horizontal and Reflex dark bronze horizontal. Both are retained for review.

Reflex pearlReflex pearl

Reflex pearl

REFERENCE
2833
FRONT SURFACE
Melamin decor
THICKNESS
18.5 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. The page references optional decor grain matching without stating the surcharge here. DGL grip channels, plinth panels and ceiling fillers have horizontal grain. Source repeats code 2932 for Reflex blue horizontal and Reflex dark bronze horizontal. Both are retained for review.

Reflex dark bronzeReflex dark bronze

Reflex dark bronze

REFERENCE
2834
FRONT SURFACE
Melamin decor
THICKNESS
18.5 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. The page references optional decor grain matching without stating the surcharge here. DGL grip channels, plinth panels and ceiling fillers have horizontal grain. Source repeats code 2932 for Reflex blue horizontal and Reflex dark bronze horizontal. Both are retained for review.

Reflex graphite, horizontalReflex graphite, horizontal

Reflex graphite, horizontal

REFERENCE
2931
FRONT SURFACE
Melamin decor
THICKNESS
18.5 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. The page references optional decor grain matching without stating the surcharge here. DGL grip channels, plinth panels and ceiling fillers have horizontal grain. Source repeats code 2932 for Reflex blue horizontal and Reflex dark bronze horizontal. Both are retained for review.

Reflex blue, horizontalReflex blue, horizontal

Reflex blue, horizontal

REFERENCE
2932
FRONT SURFACE
Melamin decor
THICKNESS
18.5 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. The page references optional decor grain matching without stating the surcharge here. DGL grip channels, plinth panels and ceiling fillers have horizontal grain. Source repeats code 2932 for Reflex blue horizontal and Reflex dark bronze horizontal. Both are retained for review.

Reflex pearl, horizontalReflex pearl, horizontal

Reflex pearl, horizontal

REFERENCE
2933
FRONT SURFACE
Melamin decor
THICKNESS
18.5 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. The page references optional decor grain matching without stating the surcharge here. DGL grip channels, plinth panels and ceiling fillers have horizontal grain. Source repeats code 2932 for Reflex blue horizontal and Reflex dark bronze horizontal. Both are retained for review.

Reflex dark bronze, horizontalReflex dark bronze, horizontal

Reflex dark bronze, horizontal

REFERENCE
2932
FRONT SURFACE
Melamin decor
THICKNESS
18.5 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. The page references optional decor grain matching without stating the surcharge here. DGL grip channels, plinth panels and ceiling fillers have horizontal grain. Source repeats code 2932 for Reflex blue horizontal and Reflex dark bronze horizontal. Both are retained for review.

Concreta graphiteConcreta graphite

Concreta graphite

REFERENCE
2733
FRONT SURFACE
Melamin decor
THICKNESS
18.5 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. The page references optional decor grain matching without stating the surcharge here. DGL grip channels, plinth panels and ceiling fillers have horizontal grain. Source repeats code 2932 for Reflex blue horizontal and Reflex dark bronze horizontal. Both are retained for review.

Concreta greyConcreta grey

Concreta grey

REFERENCE
2734
FRONT SURFACE
Melamin decor
THICKNESS
18.5 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. The page references optional decor grain matching without stating the surcharge here. DGL grip channels, plinth panels and ceiling fillers have horizontal grain. Source repeats code 2932 for Reflex blue horizontal and Reflex dark bronze horizontal. Both are retained for review.

Concreta beigeConcreta beige

Concreta beige

REFERENCE
2735
FRONT SURFACE
Melamin decor
THICKNESS
18.5 mm
Front details

Base: triple‐ply chipboard

Reverse: matching front side

Edges: 1 mm soft edges

Material notes: No standard grain matching. Shelves, finished side panels and back panels have vertical finish. The page references optional decor grain matching without stating the surcharge here. DGL grip channels, plinth panels and ceiling fillers have horizontal grain. Source repeats code 2932 for Reflex blue horizontal and Reflex dark bronze horizontal. Both are retained for review.

Lacquer

kashmirkashmir

kashmir

REFERENCE
8507
FRONT SURFACE
softmatt laquer
THICKNESS
19 mm
Front details

Base: MDF

Reverse: matching lacquered

Edges: lacquered soft edges on all sides

Material notes: RAL, NCS and other special colours are not possible.

terraterra

terra

REFERENCE
8505
FRONT SURFACE
softmatt laquer
THICKNESS
19 mm
Front details

Base: MDF

Reverse: matching lacquered

Edges: lacquered soft edges on all sides

Material notes: RAL, NCS and other special colours are not possible.

pearl whitepearl white

pearl white

REFERENCE
8506
FRONT SURFACE
softmatt laquer
THICKNESS
19 mm
Front details

Base: MDF

Reverse: matching lacquered

Edges: lacquered soft edges on all sides

Material notes: RAL, NCS and other special colours are not possible.

graphitegraphite

graphite

REFERENCE
8508
FRONT SURFACE
softmatt laquer
THICKNESS
19 mm
Front details

Base: MDF

Reverse: matching lacquered

Edges: lacquered soft edges on all sides

Material notes: RAL, NCS and other special colours are not possible.

platinum greyplatinum grey

platinum grey

REFERENCE
8510
FRONT SURFACE
softmatt laquer
THICKNESS
19 mm
Front details

Base: MDF

Reverse: matching lacquered

Edges: lacquered soft edges on all sides

Material notes: RAL, NCS and other special colours are not possible.

umbraumbra

umbra

REFERENCE
8511
FRONT SURFACE
softmatt laquer
THICKNESS
19 mm
Front details

Base: MDF

Reverse: matching lacquered

Edges: lacquered soft edges on all sides

Material notes: RAL, NCS and other special colours are not possible.

sand greysand grey

sand grey

REFERENCE
8512
FRONT SURFACE
softmatt laquer
THICKNESS
19 mm
Front details

Base: MDF

Reverse: matching lacquered

Edges: lacquered soft edges on all sides

Material notes: RAL, NCS and other special colours are not possible.

ecruecru

ecru

REFERENCE
8513
FRONT SURFACE
softmatt laquer
THICKNESS
19 mm
Front details

Base: MDF

Reverse: matching lacquered

Edges: lacquered soft edges on all sides

Material notes: RAL, NCS and other special colours are not possible.

pearl white, high‐glosspearl white, high‐gloss

pearl white, high‐gloss

REFERENCE
2610
FRONT SURFACE
high‐gloss lacquered
THICKNESS
19.2 mm
Front details

Base: MDF core

Reverse: matching high‐gloss lacquered

Edges: 1 mm glossy soft edges

grey, high‐glossgrey, high‐gloss

grey, high‐gloss

REFERENCE
2611
FRONT SURFACE
high‐gloss lacquered
THICKNESS
19.2 mm
Front details

Base: MDF core

Reverse: matching high‐gloss lacquered

Edges: 1 mm glossy soft edges

kashmir, high‐glosskashmir, high‐gloss

kashmir, high‐gloss

REFERENCE
2612
FRONT SURFACE
high‐gloss lacquered
THICKNESS
19.2 mm
Front details

Base: MDF core

Reverse: matching high‐gloss lacquered

Edges: 1 mm glossy soft edges

grigio, high‐glossgrigio, high‐gloss

grigio, high‐gloss

REFERENCE
2613
FRONT SURFACE
high‐gloss lacquered
THICKNESS
19.2 mm
Front details

Base: MDF core

Reverse: matching high‐gloss lacquered

Edges: 1 mm glossy soft edges

kashmir, fine texturedkashmir, fine textured

kashmir, fine textured

REFERENCE
8317
FRONT SURFACE
Fine textured lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

terra, fine texturedterra, fine textured

terra, fine textured

REFERENCE
8315
FRONT SURFACE
Fine textured lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

pearl white, fine texturedpearl white, fine textured

pearl white, fine textured

REFERENCE
8316
FRONT SURFACE
Fine textured lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

graphite, fine texturedgraphite, fine textured

graphite, fine textured

REFERENCE
8318
FRONT SURFACE
Fine textured lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

platinum grey, fine texturedplatinum grey, fine textured

platinum grey, fine textured

REFERENCE
8320
FRONT SURFACE
Fine textured lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

umbra, fine texturedumbra, fine textured

umbra, fine textured

REFERENCE
8321
FRONT SURFACE
Fine textured lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

sand grey, fine texturedsand grey, fine textured

sand grey, fine textured

REFERENCE
8322
FRONT SURFACE
Fine textured lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

ecru, fine texturedecru, fine textured

ecru, fine textured

REFERENCE
8323
FRONT SURFACE
Fine textured lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

graphite, satin texture lacquergraphite, satin texture lacquer

graphite, satin texture lacquer

REFERENCE
8408
FRONT SURFACE
Satin texture lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

terra, satin texture lacquerterra, satin texture lacquer

terra, satin texture lacquer

REFERENCE
8405
FRONT SURFACE
Satin texture lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

pearl white, satin texture lacquerpearl white, satin texture lacquer

pearl white, satin texture lacquer

REFERENCE
8406
FRONT SURFACE
Satin texture lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

kashmir, satin texture lacquerkashmir, satin texture lacquer

kashmir, satin texture lacquer

REFERENCE
8407
FRONT SURFACE
Satin texture lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

black, satin texture lacquerblack, satin texture lacquer

black, satin texture lacquer

REFERENCE
8432
FRONT SURFACE
Satin texture lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

platinum grey, satin texture lacquerplatinum grey, satin texture lacquer

platinum grey, satin texture lacquer

REFERENCE
8410
FRONT SURFACE
Satin texture lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

umbra, satin texture lacquerumbra, satin texture lacquer

umbra, satin texture lacquer

REFERENCE
8411
FRONT SURFACE
Satin texture lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

sand grey, satin texture lacquersand grey, satin texture lacquer

sand grey, satin texture lacquer

REFERENCE
8412
FRONT SURFACE
Satin texture lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

carbongrey, satin texture lacquercarbongrey, satin texture lacquer

carbongrey, satin texture lacquer

REFERENCE
8413
FRONT SURFACE
Satin texture lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

bronze, satin texture lacquerbronze, satin texture lacquer

bronze, satin texture lacquer

REFERENCE
8414
FRONT SURFACE
Satin texture lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

ecru, satin texture lacquerecru, satin texture lacquer

ecru, satin texture lacquer

REFERENCE
8415
FRONT SURFACE
Satin texture lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

kashmir, matt lacqueredkashmir, matt lacquered

kashmir, matt lacquered

REFERENCE
8107
FRONT SURFACE
Matt lacquered
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

terra, matt lacqueredterra, matt lacquered

terra, matt lacquered

REFERENCE
8105
FRONT SURFACE
Matt lacquered
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

pearl white, matt lacqueredpearl white, matt lacquered

pearl white, matt lacquered

REFERENCE
8106
FRONT SURFACE
Matt lacquered
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

graphite, matt lacqueredgraphite, matt lacquered

graphite, matt lacquered

REFERENCE
8108
FRONT SURFACE
Matt lacquered
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

platinum grey, matt lacqueredplatinum grey, matt lacquered

platinum grey, matt lacquered

REFERENCE
8110
FRONT SURFACE
Matt lacquered
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

umbra, matt lacqueredumbra, matt lacquered

umbra, matt lacquered

REFERENCE
8111
FRONT SURFACE
Matt lacquered
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

sand grey, matt lacqueredsand grey, matt lacquered

sand grey, matt lacquered

REFERENCE
8112
FRONT SURFACE
Matt lacquered
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

ecru, matt lacqueredecru, matt lacquered

ecru, matt lacquered

REFERENCE
8113
FRONT SURFACE
Matt lacquered
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

alpine white, high‐glossalpine white, high‐gloss

alpine white, high‐gloss

REFERENCE
588
FRONT SURFACE
High‐gloss lacquered
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching matt lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

icy white, high‐glossicy white, high‐gloss

icy white, high‐gloss

REFERENCE
8604
FRONT SURFACE
High‐gloss lacquered
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching matt lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

pearl white, high‐glosspearl white, high‐gloss

pearl white, high‐gloss

REFERENCE
8616
FRONT SURFACE
High‐gloss lacquered
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching matt lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

kashmir, high‐glosskashmir, high‐gloss

kashmir, high‐gloss

REFERENCE
8617
FRONT SURFACE
High‐gloss lacquered
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching matt lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

snow white, high‐glosssnow white, high‐gloss

snow white, high‐gloss

REFERENCE
8600
FRONT SURFACE
High‐gloss lacquered
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching matt lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

terra, high‐glossterra, high‐gloss

terra, high‐gloss

REFERENCE
8615
FRONT SURFACE
High‐gloss lacquered
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching matt lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

graphite, high‐glossgraphite, high‐gloss

graphite, high‐gloss

REFERENCE
8618
FRONT SURFACE
High‐gloss lacquered
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching matt lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

platinum grey, high‐glossplatinum grey, high‐gloss

platinum grey, high‐gloss

REFERENCE
8620
FRONT SURFACE
High‐gloss lacquered
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching matt lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

umbra, high‐glossumbra, high‐gloss

umbra, high‐gloss

REFERENCE
8621
FRONT SURFACE
High‐gloss lacquered
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching matt lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

sand grey, high‐glosssand grey, high‐gloss

sand grey, high‐gloss

REFERENCE
8622
FRONT SURFACE
High‐gloss lacquered
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching matt lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

ecru, high‐glossecru, high‐gloss

ecru, high‐gloss

REFERENCE
8613
FRONT SURFACE
High‐gloss lacquered
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching matt lacquered

Edges: 2 mm rounded edges

Material notes: Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Effect lacquer, Black SteelEffect lacquer, Black Steel

Effect lacquer, Black Steel

REFERENCE
8017
FRONT SURFACE
Effect lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: color similar to front without special effect

Edges: 2 mm rounded edges

Material notes: Handmade effect lacquer finish. Colour, shading and grinding pattern vary between panels. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Effect lacquer, silverEffect lacquer, silver

Effect lacquer, silver

REFERENCE
8012
FRONT SURFACE
Effect lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: color similar to front without special effect

Edges: 2 mm rounded edges

Material notes: Handmade effect lacquer finish. Colour, shading and grinding pattern vary between panels. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Effect lacquer, Brushed Brass lightEffect lacquer, Brushed Brass light

Effect lacquer, Brushed Brass light

REFERENCE
8013
FRONT SURFACE
Effect lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: color similar to front without special effect

Edges: 2 mm rounded edges

Material notes: Handmade effect lacquer finish. Colour, shading and grinding pattern vary between panels. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Effect lacquer, Dark BrassEffect lacquer, Dark Brass

Effect lacquer, Dark Brass

REFERENCE
8014
FRONT SURFACE
Effect lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: color similar to front without special effect

Edges: 2 mm rounded edges

Material notes: Handmade effect lacquer finish. Colour, shading and grinding pattern vary between panels. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Effect lacquer, Dark GreenEffect lacquer, Dark Green

Effect lacquer, Dark Green

REFERENCE
8015
FRONT SURFACE
Effect lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: color similar to front without special effect

Edges: 2 mm rounded edges

Material notes: Handmade effect lacquer finish. Colour, shading and grinding pattern vary between panels. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Effect lacquer, Dark BronzeEffect lacquer, Dark Bronze

Effect lacquer, Dark Bronze

REFERENCE
8016
FRONT SURFACE
Effect lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: color similar to front without special effect

Edges: 2 mm rounded edges

Material notes: Handmade effect lacquer finish. Colour, shading and grinding pattern vary between panels. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Effect lacquer, steelgreyEffect lacquer, steelgrey

Effect lacquer, steelgrey

REFERENCE
8008
FRONT SURFACE
Effect lacquer
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: color similar to front without special effect

Edges: 2 mm rounded edges

Material notes: Handmade effect lacquer finish. Colour, shading and grinding pattern vary between panels. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

kashmir, satin texture lacquerkashmir, satin texture lacquer

kashmir, satin texture lacquer

REFERENCE
8407
FRONT SURFACE
Satin texture lacquer with vertical groove shape
THICKNESS
22 mm
Front details

Base: MDF core

Reverse: matching matt lacquered

Edges: 1 mm edges on all sides matching

Material notes: Shelves, finished carcase side panels and back panels are stated as vertically veneered without groove shape. Patterned side panels: Z33. Handles and handle drillings unavailable. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

terra, satin texture lacquerterra, satin texture lacquer

terra, satin texture lacquer

REFERENCE
8405
FRONT SURFACE
Satin texture lacquer with vertical groove shape
THICKNESS
22 mm
Front details

Base: MDF core

Reverse: matching matt lacquered

Edges: 1 mm edges on all sides matching

Material notes: Shelves, finished carcase side panels and back panels are stated as vertically veneered without groove shape. Patterned side panels: Z33. Handles and handle drillings unavailable. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

pearl white, satin texture lacquerpearl white, satin texture lacquer

pearl white, satin texture lacquer

REFERENCE
8406
FRONT SURFACE
Satin texture lacquer with vertical groove shape
THICKNESS
22 mm
Front details

Base: MDF core

Reverse: matching matt lacquered

Edges: 1 mm edges on all sides matching

Material notes: Shelves, finished carcase side panels and back panels are stated as vertically veneered without groove shape. Patterned side panels: Z33. Handles and handle drillings unavailable. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

graphite, satin texture lacquergraphite, satin texture lacquer

graphite, satin texture lacquer

REFERENCE
8408
FRONT SURFACE
Satin texture lacquer with vertical groove shape
THICKNESS
22 mm
Front details

Base: MDF core

Reverse: matching matt lacquered

Edges: 1 mm edges on all sides matching

Material notes: Shelves, finished carcase side panels and back panels are stated as vertically veneered without groove shape. Patterned side panels: Z33. Handles and handle drillings unavailable. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

ecru, satin texture lacquerecru, satin texture lacquer

ecru, satin texture lacquer

REFERENCE
8415
FRONT SURFACE
Satin texture lacquer with vertical groove shape
THICKNESS
22 mm
Front details

Base: MDF core

Reverse: matching matt lacquered

Edges: 1 mm edges on all sides matching

Material notes: Shelves, finished carcase side panels and back panels are stated as vertically veneered without groove shape. Patterned side panels: Z33. Handles and handle drillings unavailable. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

platinum grey, satin texture lacquerplatinum grey, satin texture lacquer

platinum grey, satin texture lacquer

REFERENCE
8410
FRONT SURFACE
Satin texture lacquer with vertical groove shape
THICKNESS
22 mm
Front details

Base: MDF core

Reverse: matching matt lacquered

Edges: 1 mm edges on all sides matching

Material notes: Shelves, finished carcase side panels and back panels are stated as vertically veneered without groove shape. Patterned side panels: Z33. Handles and handle drillings unavailable. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

umbra, satin texture lacquerumbra, satin texture lacquer

umbra, satin texture lacquer

REFERENCE
8411
FRONT SURFACE
Satin texture lacquer with vertical groove shape
THICKNESS
22 mm
Front details

Base: MDF core

Reverse: matching matt lacquered

Edges: 1 mm edges on all sides matching

Material notes: Shelves, finished carcase side panels and back panels are stated as vertically veneered without groove shape. Patterned side panels: Z33. Handles and handle drillings unavailable. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

sand grey, satin texture lacquersand grey, satin texture lacquer

sand grey, satin texture lacquer

REFERENCE
8412
FRONT SURFACE
Satin texture lacquer with vertical groove shape
THICKNESS
22 mm
Front details

Base: MDF core

Reverse: matching matt lacquered

Edges: 1 mm edges on all sides matching

Material notes: Shelves, finished carcase side panels and back panels are stated as vertically veneered without groove shape. Patterned side panels: Z33. Handles and handle drillings unavailable. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

black, satin texture lacquerblack, satin texture lacquer

black, satin texture lacquer

REFERENCE
8432
FRONT SURFACE
Satin texture lacquer with vertical groove shape
THICKNESS
22 mm
Front details

Base: MDF core

Reverse: matching matt lacquered

Edges: 1 mm edges on all sides matching

Material notes: Shelves, finished carcase side panels and back panels are stated as vertically veneered without groove shape. Patterned side panels: Z33. Handles and handle drillings unavailable. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

kashmir, satin texture lacquerkashmir, satin texture lacquer

kashmir, satin texture lacquer

REFERENCE
8407
FRONT SURFACE
Aluminum frame door with satin texture lacquered center panel
THICKNESS
24 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

terra, satin texture lacquerterra, satin texture lacquer

terra, satin texture lacquer

REFERENCE
8405
FRONT SURFACE
Aluminum frame door with satin texture lacquered center panel
THICKNESS
24 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

pearl white, satin texture lacquerpearl white, satin texture lacquer

pearl white, satin texture lacquer

REFERENCE
8406
FRONT SURFACE
Aluminum frame door with satin texture lacquered center panel
THICKNESS
24 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

graphite, satin texture lacquergraphite, satin texture lacquer

graphite, satin texture lacquer

REFERENCE
8408
FRONT SURFACE
Aluminum frame door with satin texture lacquered center panel
THICKNESS
24 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

ecru, satin texture lacquerecru, satin texture lacquer

ecru, satin texture lacquer

REFERENCE
8415
FRONT SURFACE
Aluminum frame door with satin texture lacquered center panel
THICKNESS
24 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

platinum grey, satin texture lacquerplatinum grey, satin texture lacquer

platinum grey, satin texture lacquer

REFERENCE
8410
FRONT SURFACE
Aluminum frame door with satin texture lacquered center panel
THICKNESS
24 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

umbra, satin texture lacquerumbra, satin texture lacquer

umbra, satin texture lacquer

REFERENCE
8411
FRONT SURFACE
Aluminum frame door with satin texture lacquered center panel
THICKNESS
24 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

sand grey, satin texture lacquersand grey, satin texture lacquer

sand grey, satin texture lacquer

REFERENCE
8412
FRONT SURFACE
Aluminum frame door with satin texture lacquered center panel
THICKNESS
24 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

black, satin texture lacquerblack, satin texture lacquer

black, satin texture lacquer

REFERENCE
8432
FRONT SURFACE
Aluminum frame door with satin texture lacquered center panel
THICKNESS
24 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

kashmir, high‐glosskashmir, high‐gloss

kashmir, high‐gloss

REFERENCE
8617
FRONT SURFACE
Aluminum frame door with high‐gloss lacquered center panel
THICKNESS
24 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

terra, high‐glossterra, high‐gloss

terra, high‐gloss

REFERENCE
8615
FRONT SURFACE
Aluminum frame door with high‐gloss lacquered center panel
THICKNESS
24 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

pearl white, high‐glosspearl white, high‐gloss

pearl white, high‐gloss

REFERENCE
8616
FRONT SURFACE
Aluminum frame door with high‐gloss lacquered center panel
THICKNESS
24 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

graphite, high‐glossgraphite, high‐gloss

graphite, high‐gloss

REFERENCE
8618
FRONT SURFACE
Aluminum frame door with high‐gloss lacquered center panel
THICKNESS
24 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

ecru, high‐glossecru, high‐gloss

ecru, high‐gloss

REFERENCE
8613
FRONT SURFACE
Aluminum frame door with high‐gloss lacquered center panel
THICKNESS
24 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

platinum grey, high‐glossplatinum grey, high‐gloss

platinum grey, high‐gloss

REFERENCE
8620
FRONT SURFACE
Aluminum frame door with high‐gloss lacquered center panel
THICKNESS
24 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

umbra, high‐glossumbra, high‐gloss

umbra, high‐gloss

REFERENCE
8621
FRONT SURFACE
Aluminum frame door with high‐gloss lacquered center panel
THICKNESS
24 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

sand grey, high‐glosssand grey, high‐gloss

sand grey, high‐gloss

REFERENCE
8622
FRONT SURFACE
Aluminum frame door with high‐gloss lacquered center panel
THICKNESS
24 mm
Front details

Base: MDF core

Reverse: matching lacquered

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

graphite, satin texture lacquergraphite, satin texture lacquer

graphite, satin texture lacquer

REFERENCE
8408
FRONT SURFACE
Frame door (frame width 0.65 cm), satin texture lacquer
THICKNESS
22 mm
Front details

Base: MDF core

Reverse: matching lacquered

Material notes: Patterned side panels: Z33. Source states frame width 0.65 cm. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

terra, satin texture lacquerterra, satin texture lacquer

terra, satin texture lacquer

REFERENCE
8405
FRONT SURFACE
Frame door (frame width 0.65 cm), satin texture lacquer
THICKNESS
22 mm
Front details

Base: MDF core

Reverse: matching lacquered

Material notes: Patterned side panels: Z33. Source states frame width 0.65 cm. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

pearl white, satin texture lacquerpearl white, satin texture lacquer

pearl white, satin texture lacquer

REFERENCE
8406
FRONT SURFACE
Frame door (frame width 0.65 cm), satin texture lacquer
THICKNESS
22 mm
Front details

Base: MDF core

Reverse: matching lacquered

Material notes: Patterned side panels: Z33. Source states frame width 0.65 cm. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

kashmir, satin texture lacquerkashmir, satin texture lacquer

kashmir, satin texture lacquer

REFERENCE
8407
FRONT SURFACE
Frame door (frame width 0.65 cm), satin texture lacquer
THICKNESS
22 mm
Front details

Base: MDF core

Reverse: matching lacquered

Material notes: Patterned side panels: Z33. Source states frame width 0.65 cm. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

ecru, satin texture lacquerecru, satin texture lacquer

ecru, satin texture lacquer

REFERENCE
8415
FRONT SURFACE
Frame door (frame width 0.65 cm), satin texture lacquer
THICKNESS
22 mm
Front details

Base: MDF core

Reverse: matching lacquered

Material notes: Patterned side panels: Z33. Source states frame width 0.65 cm. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

platinum grey, satin texture lacquerplatinum grey, satin texture lacquer

platinum grey, satin texture lacquer

REFERENCE
8410
FRONT SURFACE
Frame door (frame width 0.65 cm), satin texture lacquer
THICKNESS
22 mm
Front details

Base: MDF core

Reverse: matching lacquered

Material notes: Patterned side panels: Z33. Source states frame width 0.65 cm. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

umbra, satin texture lacquerumbra, satin texture lacquer

umbra, satin texture lacquer

REFERENCE
8411
FRONT SURFACE
Frame door (frame width 0.65 cm), satin texture lacquer
THICKNESS
22 mm
Front details

Base: MDF core

Reverse: matching lacquered

Material notes: Patterned side panels: Z33. Source states frame width 0.65 cm. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

sand grey, satin texture lacquersand grey, satin texture lacquer

sand grey, satin texture lacquer

REFERENCE
8412
FRONT SURFACE
Frame door (frame width 0.65 cm), satin texture lacquer
THICKNESS
22 mm
Front details

Base: MDF core

Reverse: matching lacquered

Material notes: Patterned side panels: Z33. Source states frame width 0.65 cm. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

black, satin texture lacquerblack, satin texture lacquer

black, satin texture lacquer

REFERENCE
8432
FRONT SURFACE
Frame door (frame width 0.65 cm), satin texture lacquer
THICKNESS
22 mm
Front details

Base: MDF core

Reverse: matching lacquered

Material notes: Patterned side panels: Z33. Source states frame width 0.65 cm. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Fenix nano

Nano blackNano black

Nano black

REFERENCE
2712
FRONT SURFACE
Laminate with nano surface and soft touch effect
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching front side

Edges: 1.2 mm soft edges

Material notes: Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Nano grigioNano grigio

Nano grigio

REFERENCE
2711
FRONT SURFACE
Laminate with nano surface and soft touch effect
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching front side

Edges: 1.2 mm soft edges

Material notes: Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Nano lotus whiteNano lotus white

Nano lotus white

REFERENCE
2713
FRONT SURFACE
Laminate with nano surface and soft touch effect
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching front side

Edges: 1.2 mm soft edges

Material notes: Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Nano taupeNano taupe

Nano taupe

REFERENCE
2716
FRONT SURFACE
Laminate with nano surface and soft touch effect
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching front side

Edges: 1.2 mm soft edges

Material notes: Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Nano green greyNano green grey

Nano green grey

REFERENCE
2719
FRONT SURFACE
Laminate with nano surface and soft touch effect
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching front side

Edges: 1.2 mm soft edges

Material notes: Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Nano beigeNano beige

Nano beige

REFERENCE
2722
FRONT SURFACE
Laminate with nano surface and soft touch effect
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching front side

Edges: 1.2 mm soft edges

Material notes: Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Nano cacaoNano cacao

Nano cacao

REFERENCE
2723
FRONT SURFACE
Laminate with nano surface and soft touch effect
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching front side

Edges: 1.2 mm soft edges

Material notes: Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Nano verdeNano verde

Nano verde

REFERENCE
2724
FRONT SURFACE
Laminate with nano surface and soft touch effect
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matching front side

Edges: 1.2 mm soft edges

Material notes: Light, unsuitable cleaning agents and cooking steam can discolour the surface and edging differently.

Glass

blackblack

black

REFERENCE
8732
FRONT SURFACE
polished glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

mirror greymirror grey

mirror grey

REFERENCE
981
FRONT SURFACE
polished glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

mirror bronzemirror bronze

mirror bronze

REFERENCE
983
FRONT SURFACE
polished glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

terraterra

terra

REFERENCE
8705
FRONT SURFACE
polished glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

pearl whitepearl white

pearl white

REFERENCE
8706
FRONT SURFACE
polished glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

kashmirkashmir

kashmir

REFERENCE
8707
FRONT SURFACE
polished glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

graphitegraphite

graphite

REFERENCE
8708
FRONT SURFACE
polished glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

platinum greyplatinum grey

platinum grey

REFERENCE
8710
FRONT SURFACE
polished glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

umbraumbra

umbra

REFERENCE
8711
FRONT SURFACE
polished glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

sand greysand grey

sand grey

REFERENCE
8712
FRONT SURFACE
polished glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

ecruecru

ecru

REFERENCE
8713
FRONT SURFACE
polished glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

schwarzschwarz

schwarz

REFERENCE
8832
FRONT SURFACE
frosted glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

optic glass mirror typeoptic glass mirror type

optic glass mirror type

REFERENCE
980
FRONT SURFACE
frosted glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

matelac bronzematelac bronze

matelac bronze

REFERENCE
982
FRONT SURFACE
frosted glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

terraterra

terra

REFERENCE
8805
FRONT SURFACE
frosted glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

pearl whitepearl white

pearl white

REFERENCE
8806
FRONT SURFACE
frosted glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

kashmirkashmir

kashmir

REFERENCE
8807
FRONT SURFACE
frosted glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

graphitegraphite

graphite

REFERENCE
8808
FRONT SURFACE
frosted glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

platinum greyplatinum grey

platinum grey

REFERENCE
8810
FRONT SURFACE
frosted glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

umbraumbra

umbra

REFERENCE
8811
FRONT SURFACE
frosted glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

sand greysand grey

sand grey

REFERENCE
8812
FRONT SURFACE
frosted glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

ecruecru

ecru

REFERENCE
8813
FRONT SURFACE
frosted glassdoor (ESG glass) with aluminum frame carbongrey
THICKNESS
21 mm
Front details

Reverse: matt lacquered

Material notes: For e:line, only Tip-On, PTO, ETO or handle profiles 88.630–88.635. Handles and handle drillings unavailable. Front panels cannot be fitted together. Front panels, fitting strips, corner posts and drawer panels smaller than 13.8 cm use a 16 mm carbongrey lacquered back panel. Glass backs of pullout drawer fronts use 4 mm onyx melamine. Aluminum frame in any RAL colour: 5% surcharge. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Metal

aluminum anodisedaluminum anodised

aluminum anodised

REFERENCE
929
FRONT SURFACE
aluminum anodised
THICKNESS
20 mm
Front details

Base: triple‐ply chipboard

Reverse: matching material

Edges: 1 mm flush aluminum edges on all sides

Material notes: Anodization can cause batch colour deviations. For colour 929, DGL grip profile colour ASP Aluminum is an alternative. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Light Bronze anodisedLight Bronze anodised

Light Bronze anodised

REFERENCE
8909
FRONT SURFACE
aluminum anodised
THICKNESS
20 mm
Front details

Base: triple‐ply chipboard

Reverse: matching material

Edges: 1 mm flush aluminum edges on all sides

Material notes: Anodization can cause batch colour deviations. For colour 929, DGL grip profile colour ASP Aluminum is an alternative. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

platinum grey anodisedplatinum grey anodised

platinum grey anodised

REFERENCE
8913
FRONT SURFACE
aluminum anodised
THICKNESS
20 mm
Front details

Base: triple‐ply chipboard

Reverse: matching material

Edges: 1 mm flush aluminum edges on all sides

Material notes: Anodization can cause batch colour deviations. For colour 929, DGL grip profile colour ASP Aluminum is an alternative. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Light Bronze anodisedLight Bronze anodised

Light Bronze anodised

REFERENCE
8909
FRONT SURFACE
Aluminum frame door with aluminum anodized center panel
THICKNESS
24 mm
Front details

Base: triple‐ply chipboard

Reverse: matching material

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

aluminum anodisedaluminum anodised

aluminum anodised

REFERENCE
929
FRONT SURFACE
Aluminum frame door with aluminum anodized center panel
THICKNESS
24 mm
Front details

Base: triple‐ply chipboard

Reverse: matching material

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

platinum grey anodisedplatinum grey anodised

platinum grey anodised

REFERENCE
8913
FRONT SURFACE
Aluminum frame door with aluminum anodized center panel
THICKNESS
24 mm
Front details

Base: triple‐ply chipboard

Reverse: matching material

Edges: Aluminum frame

Frame options: MM Brass, TP Titanium, CG Chrome, SW Black, BR Bronze, CB Carbongrey

Material notes: Front panels cannot be fitted together. Shelves, finished carcase side panels and back panels are stated as vertically veneered without aluminum frame. Panels with aluminum frame: Z33. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

stainless steel, brushedstainless steel, brushed

stainless steel, brushed

REFERENCE
912
FRONT SURFACE
stainless steel cladded
THICKNESS
20 mm
Front details

Base: triple‐ply chipboard

Reverse: melamine onyx

Material notes: Observe the dishwasher manufacturer’s approved maximum front-panel weight.

stainless steel, eccentric grinding surfacestainless steel, eccentric grinding surface

stainless steel, eccentric grinding surface

REFERENCE
911
FRONT SURFACE
stainless steel cladded
THICKNESS
20 mm
Front details

Base: triple‐ply chipboard

Reverse: melamine onyx

Material notes: Observe the dishwasher manufacturer’s approved maximum front-panel weight.

stainless steel, high polishedstainless steel, high polished

stainless steel, high polished

REFERENCE
914
FRONT SURFACE
stainless steel cladded
THICKNESS
20 mm
Front details

Base: triple‐ply chipboard

Reverse: melamine onyx

Material notes: Observe the dishwasher manufacturer’s approved maximum front-panel weight.

Concrete

black concreteblack concrete

black concrete

REFERENCE
8927
FRONT SURFACE
real concrete surface
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matt laquered

Material notes: Handmade concrete finish. Colour, shading vary between panels. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

darkbrown concretedarkbrown concrete

darkbrown concrete

REFERENCE
8928
FRONT SURFACE
real concrete surface
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matt laquered

Material notes: Handmade concrete finish. Colour, shading vary between panels. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

ecru concreteecru concrete

ecru concrete

REFERENCE
8929
FRONT SURFACE
real concrete surface
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matt laquered

Material notes: Handmade concrete finish. Colour, shading vary between panels. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

white concretewhite concrete

white concrete

REFERENCE
8930
FRONT SURFACE
real concrete surface
THICKNESS
19 mm
Front details

Base: MDF core

Reverse: matt laquered

Material notes: Handmade concrete finish. Colour, shading vary between panels. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Linoleum

oliveolive

olive

REFERENCE
7800
FRONT SURFACE
Linoleum
THICKNESS
20 mm
Front details

Base: triple‐ply chipboard

Reverse: Linoleum

Edges: 1 mm Linoleum

Material notes: Natural linoleum can vary in colour between delivery batches. Light, unsuitable cleaning agents and cooking vapours can change surface colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

pebblepebble

pebble

REFERENCE
7801
FRONT SURFACE
Linoleum
THICKNESS
20 mm
Front details

Base: triple‐ply chipboard

Reverse: Linoleum

Edges: 1 mm Linoleum

Material notes: Natural linoleum can vary in colour between delivery batches. Light, unsuitable cleaning agents and cooking vapours can change surface colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

ironiron

iron

REFERENCE
7802
FRONT SURFACE
Linoleum
THICKNESS
20 mm
Front details

Base: triple‐ply chipboard

Reverse: Linoleum

Edges: 1 mm Linoleum

Material notes: Natural linoleum can vary in colour between delivery batches. Light, unsuitable cleaning agents and cooking vapours can change surface colour. Additions to a delivered kitchen require a reference sample from the first delivery. Handmade surface variation is possible.

Planning an Eggersmann kitchen

We design the layout around the room and how you use it. We bring the cabinetry, worktops and appliances together with you, at our Tallinn showroom or remotely.

Before ordering

Practical questions.

Kitchen interior from the Amanjeda Casa archive.

What distinguishes Eggersmann unique from glance?

With unique, cabinet fronts, sides and worktops can share one material, including natural stone. Glance is a glass display cabinet system with slender aluminium frames.

What should I share for a first kitchen consultation?

A floor plan, approximate dimensions or a few photos are enough to get started. Existing service connections, any appliances or finishes you’ve already chosen, and the project location and timing help us understand the brief.

See the Tallinn showroom address and opening hours.

Can I work with Casa alongside my architect?

Yes. We work with your architect or interior designer on the layout, materials and fittings. We can also prepare layout and technical drawings where agreed. The project scope sets out who is responsible for drawings and technical coordination.

See the information for architects and designers.

How are appliances and surfaces selected?

We consider Gaggenau appliances, Foster sinks and taps and Cosentino surfaces alongside the Eggersmann cabinetry. We check the product dimensions and requirements for ventilation, plumbing and electrical connections before finalising the specification.

How is the kitchen priced?

The price depends on the layout, cabinetry, finishes, appliances and any agreed services. The quotation lists the agreed products, dimensions, finishes and scope. A budget range helps us tailor the proposal.

How long does kitchen production take?

Kitchen production takes approximately four months. We confirm the production schedule when you order. Delivery and any installation are arranged separately.

Where do you deliver?

We deliver only within the European Union. We agree delivery costs, access, site readiness and who handles any installation for each project. We also provide care guidance for the selected materials.

How do I save a preferred cabinet finish?

Open a sample in Materials and follow its enquiry link. The showroom form includes the finish and its catalogue reference. We can compare the physical sample with your worktop and cabinetry in Tallinn.